Please Note: We are currently experiencing occasional errors with the automated shipping cost calculations with both UPS and Fedex on some orders.  The shipping charges may not be accurate.  Our shipping department will double check the rates and you will either automatically be credited with a refund of any overcharge, or you will be advised that an additional charge is necessary to cover the shipping cost.  At the moment this appears to only be the case with air shipments.  We are working with both carriers at this time to resolve the issue.

AS1072 Firesleeve - SAE Aviation - No Marking - Oxide-Red or Black

AFAFS
In stock
FlameShield™ aviation /aerospace grade high temperature, heat, flame and pyro resistant firesleeve jacket is manufactured to SAE AS1072E standards so it can pass the fire testing standards of AS1055F: and the requirements of FAA TSP - C53a and TSO - C75. It may be used for all fuel, oil , hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions. Fire-proof hose lines are obtained when te proper size firesleeve is selected and properly assemebled with appropiate clamps. The material can withstand temperatures of up to 500°F / 260°C continuous exposure; Molten Splash at 2200°F / 1205°C for periods up to 15 minutes and short excursions to 3000°F / 1650°C.