Please Note: We are currently experiencing occasional errors with the automated shipping cost calculations with both UPS and Fedex on some orders.  The shipping charges may not be accurate.  Our shipping department will double check the rates and you will either automatically be credited with a refund of any overcharge, or you will be advised that an additional charge is necessary to cover the shipping cost.  At the moment this appears to only be the case with air shipments.  We are working with both carriers at this time to resolve the issue.

End Seal Paste - Oxide-Red or Black

AFS-ESP
In stock
FlameShield™ End Seal Paste is a special formulation of high temperature silicone rubber used to seal the exposed ends of firesleeve. Sealing the end of the firesleeve prevents it from absorbing or wicking liquids such as fuel, oil and water, and also prevents dust and dirt from entering the finished hose or cable assembly. Becomes tack free in 60 to 90 minutes and cures fully in 16 to 24 hours*. Cure can be accelerated by increasing relative humidity and also adding heat. The material can withstand temperatures of up to 500°F / 260°C rating once cured.